TL-25M8180Z_F20-S7-7.wnc -1202Dec20.htm

Job Sheet-25M8180Z_F20-S7-7.wnc

Path : D:\sejong\model\2025\25M8180Z\F20\F20_1\

Geometry : 25M8180Z_F20_251212.x_t.wnc

P/G : M041202Dec20.htm


X_Min : -225.000, X_Set_A : -230.000	Y_Max : 190.004, Y_Set_A : 195.004	Z_Max : 81.019
X_Max : 225.000, X_Set_A : 230.000	Y_Min : -190.004, Y_Set_A : -195.004	Z_Min : 0.000
X_Center : 0.000	Y_Center : 0.000
X_Length 450.00	Y_Length 380.01	Z_Length 81.02

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

	No.						Krpm	Feed Rate	Approach Rate	Z-Step	Angle A,B,C
10	91	10	Bull-nose D 6.01 r 0.20	6.01	0.20	$images\outil91.tool.png$	6.5	2200	2200
11	81, 82, 83, 84, 89	11	Bull-nose D 9.98 r 0.20	9.98	0.20	$images\outil81.tool.png$	6.2	2200	2200
11	88	11	Bull-nose D 9.98 r 0.20	9.98	0.20	$images\outil88.tool.png$	6.2	2200	2200	0.25
11	90	11	Bull-nose D 10.00 r 0.20	10.00	0.20	$images\outil90.tool.png$	6.2	2200	2200
12	305	12	Ball-end D 0.60	0.60		$images\outil305.tool.png$	7.9	700	1200
14	85, 86, 87, 92, 93, 94	14	Ball-end D 10.00	10.00		$images\outil85.tool.png$	6.2	2300	2300
15	95	15	Ball-end D 6.00	6.00		$images\outil95.tool.png$	6.5	2000	2000
17	96, 97, 98, 99	17	Ball-end D 3.00	3.00		$images\outil96.tool.png$	7.5	1800	2000
18	300	18	Ball-end D 2.00	2.00		$images\outil300.tool.png$	7.9	1200	1500
19	301	19	Ball-end D 0.60	0.60		$images\outil301.tool.png$	7.9	700	1200	0.01
20	302, 303, 304	20	Ball-end D 1.00	1.00		$images\outil302.tool.png$	7.9	800	1200
WorkNC Tool List: 10, 11, 12, 14, 15, 17, 18, 19, 20
Same tool number with different values.